همه محصولات
Moisture-proof Customized Printing Food Grade PP Nutritional Supplements Packaging
| محل منبع | چین |
|---|---|
| نام تجاری | JND |
| گواهی | ISO9001/45001/ FSSC22000 |
| شماره مدل | VCB24T104 |
| مقدار حداقل تعداد سفارش | 50000 مجموعه |
| قیمت | negotiable |
| جزئیات بسته بندی | کیسه PE +کارتن کاغذ اندازه: 590*390*345mm برای لوله 700pcs ؛ 590*390*345mm برای کلاه 3500pcs |
| زمان تحویل | 3-5 روز |
| شرایط پرداخت | L/C ، T/T |
| قابلیت ارائه | 50000 قطعه قطعه برای لوله در روز ؛ 30000 قطعه برای درب در روز |
برای نمونه ها و کوپن های رایگان با من تماس بگیرید.
واتساپ:0086 18588475571
ویچت: 0086 18588475571
اسکایپ: sales10@aixton.com
اگر شما هر گونه نگرانی دارید، ما 24 ساعت کمک آنلاین ارائه می دهیم.
xجزئیات محصول
| برنامه | مکمل های غذایی | نشان | ضد رطوبت |
|---|---|---|---|
| مواد مخدر | پستان | خشک کننده | گزینه |
| چاپ | سفارشی | طراحی درب | مارپیچ |
| OEM و ODM | موجود | ماده بدن | درجه غذایی PP |
| برجسته کردن | Food Grade Nutritional Supplements Packaging,Moisture-proof Nutritional Supplements Packaging,PP Effervescent Tablet Packaging,Moisture-proof Nutritional Supplements Packaging,PP Effervescent Tablet Packaging |
||
توضیحات محصول
Moisture-proof Customized Printing Food Grade PP Nutritional Supplements Packaging
1. Product Description
Designed for convenience and freshness, our moisure-proof, child-resistant tubes are perfect for storing effervescent tablets. Made with food-grade, high-quality plastic, they protect tablets from moisture, light, and air, ensuring product stability. The cap of effervescent tube is cleverly designed, which is composed of desiccant, spiral spring and anti-theft ring. It plays different roles in protecting the safety and effectiveness of tablets. Desiccant is the standard configuration of tablet drugs. Its function is to absorb the moisture inside the bottle and keep the internal environment dry. The desiccant inside the effervescent tube is placed on the top of the bottle cap, which not only saves space, but also avoids direct contact between the desiccant and drugs.
2. Product Specification
♦Materials Quality:
|
Parts |
Tube Body |
Cap |
|
Color |
Customized |
Customized |
♦Specifications:
As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
|
Type |
No. |
Item |
Specifications |
Inspection method |
AQL Type |
|
|
Molding
|
1
|
Appearance |
|
Visual |
Light |
|
|
|
2 |
Peculiar smell |
No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample |
Smell |
Main |
|
|
|
3 |
￠24*104 |
Diameter |
24.0±1.0mm |
caliper |
Main |
|
|
|
|
Height |
104.0±1.0mm |
Height gauge |
Main |
|
|
|
|
Wall Thickness |
1.0±0.4mm |
Caliper |
Main |
|
|
4 |
￠24 Spiral Cap |
Diameter |
22.0±0.8mm |
caliper |
Main |
|
|
|
|
Height |
27.0±1.0mm |
Height gauge |
Main |
|
Function |
1 |
Sealing Property |
Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. |
Visual |
Main |
|
|
|
2 |
Drop Property |
Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. |
Visual |
Main |
|
|
|
3 |
Thermo stability |
Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured |
Visual |
Main |
|
|
|
1 |
Drawing |
Color, Picture and Words same as standard sample |
According to standard sample |
Key |
|
|
|
2 |
Appearance |
The appearance of the printed product is clean no soiling and deformity refer to standard sample |
Visual |
Light |
|
|
|
3 |
Peel Strength |
Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. |
Tape test |
Main |
|
♦Storage:
keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
Need to pad higher, away from the ground and wall 10cm above. no pressure.
3. Company Profile
4. Our Clients
محصولات توصیه شده