همه محصولات
FDA Approved Plastic Material Temper-Evident Lids Customized Printing Effervescent Vitamins Packaging
| محل منبع | چین |
|---|---|
| نام تجاری | JND |
| گواهی | ISO9001/45001/ FSSC22000 |
| شماره مدل | VCB29T140 |
| مقدار حداقل تعداد سفارش | 50000 مجموعه |
| قیمت | USD0.07 per unit |
| جزئیات بسته بندی | کیسه PE +اندازه کارتن کاغذ: 580*380*330mm برای لوله 350pcs ؛ 380*290*460mm برای درپوش 1500pcs |
| زمان تحویل | 3-5 روز |
| شرایط پرداخت | L/C ، T/T |
| قابلیت ارائه | 60000 قطعه قطعه برای لوله در روز ؛ 24000 قطعه برای درب در روز |
برای نمونه ها و کوپن های رایگان با من تماس بگیرید.
واتساپ:0086 18588475571
ویچت: 0086 18588475571
اسکایپ: sales10@aixton.com
اگر شما هر گونه نگرانی دارید، ما 24 ساعت کمک آنلاین ارائه می دهیم.
xجزئیات محصول
| برنامه | ویتامین ها | نشان | مطلق |
|---|---|---|---|
| ماده بدن | درجه غذایی PP | خشک کننده | بله |
| چاپ | سفارشی | طراحی درب | مارپیچ |
| OEM و ODM | موجود | مواد مخدر | پستان |
| برجسته کردن | FDA Approved Effervescent Vitamins Packaging,Customized Printing Effervescent Vitamins Packaging,PE Material Effervescent Vitamins Packaging,Customized Printing Effervescent Vitamins Packaging,PE Material Effervescent Vitamins Packaging |
||
توضیحات محصول
FDA-approved Plastic Material Temper-evident Lids Customized Printing Vitamins Packaging
1. Product Description
Discover JND’s premium Vitamins Packaging—crafted with FDA-approved Plastic Material to ensure the safety and durability. Our tubes feature advanced moisture-resistant technology, preserving the potency of vitamins, supplements, and OTC medications while maintaining compliance with FDA and ISO9001 standards.
2. Product Specification
♦Materials Quality:
|
Parts |
Tube Body |
Cap |
|
Color |
Customized |
Customized |
♦Specifications:
As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
|
Type |
No. |
Item |
Specifications |
Inspection method |
AQL Type |
|
|
Molding
|
1
|
Appearance |
|
Visual |
Light |
|
|
|
2 |
Peculiar smell |
No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample |
Smell |
Main |
|
|
|
3 |
￠29*140 |
Diameter |
29.0±1.0mm |
caliper |
Main |
|
|
|
|
Height |
140.0±1.0mm |
Height gauge |
Main |
|
|
|
|
Wall Thickness |
1.0±0.4mm |
Caliper |
Main |
|
|
4 |
￠29 Spiral Cap |
Diameter |
28.0±0.8mm |
caliper |
Main |
|
|
|
|
Height |
33.0±1.0mm |
Height gauge |
Main |
|
Function |
1 |
Sealing Property |
Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. |
Visual |
Main |
|
|
|
2 |
Drop Property |
Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. |
Visual |
Main |
|
|
|
3 |
Thermo stability |
Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured |
Visual |
Main |
|
|
|
1 |
Drawing |
Color, Picture and Words same as standard sample |
According to standard sample |
Key |
|
|
|
2 |
Appearance |
The appearance of the printed product is clean no soiling and deformity refer to standard sample |
Visual |
Light |
|
|
|
3 |
Peel Strength |
Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. |
Tape test |
Main |
|
♦Storage:
keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
Need to pad higher, away from the ground and wall 10cm above. no pressure.
3. Company Profile
4. Our Clients
محصولات توصیه شده