Moisture-proof Lids Versatile Effervescent Tablet Packaging For Vitamins Medications Electrolytes Packaging
محل منبع | چین |
---|---|
نام تجاری | JND |
گواهی | ISO9001/45001/ FSSC22000 |
شماره مدل | VCB38T96 |
مقدار حداقل تعداد سفارش | 50000 مجموعه |
قیمت | USD0.15 per unit |
جزئیات بسته بندی | کیسه PE +کارتن کاغذ اندازه: 580*380*330mm برای لوله 300pcs ؛ 380*290*460mm برای کلاه 800pcs |
زمان تحویل | 3-5 روز |
شرایط پرداخت | L/C ، T/T |
قابلیت ارائه | 20000 قطعه قطعه برای لوله در روز ؛ 18000 قطعه برای درب در روز |

برای نمونه ها و کوپن های رایگان با من تماس بگیرید.
واتساپ:0086 18588475571
ویچت: 0086 18588475571
اسکایپ: sales10@aixton.com
اگر شما هر گونه نگرانی دارید، ما 24 ساعت کمک آنلاین ارائه می دهیم.
xبرنامه | ویتامین ها ، داروها ، الکترولیت ها | طراحی | اندازه های قابل حمل |
---|---|---|---|
ماده بدن | درجه غذایی PP | خشک کننده | بله |
نشان | ضد رطوبت | طراحی درب | مارپیچ |
OEM و ODM | موجود | مواد مخدر | پستان |
برجسته کردن | Moisture-proof Effervescent Tablet Packaging,Versatile Effervescent Tablet Packaging,Versatile Effervescent Tablet Packaging |
Portable sizes Moisture-proof Lids Versatile for vitamins medications electrolytes Packaging
1. Product Description
JND’s innovative effervescent tablet packaging combines portable sizes with cutting-edge moisture-proof lids, ensuring your vitamins, medications, or electrolytes stay fresh and potent anytime, anywhere. Designed for modern lifestyles, our compact tubes are versatile enough to organize daily supplements, travel essentials, or workout recovery boosters—all while resisting humidity and spills. The airtight, lightweight design fits seamlessly into bags, gym kits, or pockets, empowering you to stay hydrated and nourished on the go.
2. Product Specification
♦Materials Quality:
Parts |
Tube Body |
Cap |
Color |
Customized |
Customized |
♦Specifications:
As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
Type |
No. |
Item |
Specifications |
Inspection method |
AQL Type |
|
Molding
|
1
|
Appearance |
|
Visual |
Light |
|
|
2 |
Peculiar smell |
No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample |
Smell |
Main |
|
|
3 |
¢38*96 |
Diameter |
38.0±1.0mm |
caliper |
Main |
|
|
|
Height |
96.0±1.0mm |
Height gauge |
Main |
|
|
|
Wall Thickness |
1.0±0.4mm |
Caliper |
Main |
|
4 |
¢38 Spiral Cap |
Diameter |
36.0±0.8mm |
caliper |
Main |
|
|
|
Height |
41.0±1.0mm |
Height gauge |
Main |
Function |
1 |
Sealing Property |
Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. |
Visual |
Main |
|
|
2 |
Drop Property |
Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. |
Visual |
Main |
|
|
3 |
Thermo stability |
Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured |
Visual |
Main |
|
|
1 |
Drawing |
Color, Picture and Words same as standard sample |
According to standard sample |
Key |
|
|
2 |
Appearance |
The appearance of the printed product is clean no soiling and deformity refer to standard sample |
Visual |
Light |
|
|
3 |
Peel Strength |
Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. |
Tape test |
Main |
♦Storage:
keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
Need to pad higher, away from the ground and wall 10cm above. no pressure.
3. Company Profile
4. Our Clients